A division of David Warther & Co.
©2009 Guitar Parts and More | PO Box 6 | Dover , Ohio 44622

Bone & Ivory Guitar Bridge Pins


Guitar bridge pins of bone, fossil mammoth ivory (FMI) and Pre-Ban elephant ivory (PBE). Made in USA ! Beautifully hand crafted sets of guitar bridge pins. Bone and fossil mammoth pins can sell and ship internationally but Pre-ban ivory pins are for US customers only.

All of these bone and ivory guitar bridge pins are Made in USA and are precision machined to exacting industry standards. These are not mass produced pins. They are constructed individually, using original factory pins and blueprint line drawings as a reference and are highly polished finished pieces. The ones pictured are an example as we sell a lot of pins so it is not feasible to take a picture of every set, but we assure you, the ones you will receive are of the same high quality.

You have a choice of 3 mm abalone dot inlays (abalone for US customers only), black dot inlays, plain head (no inlay) or faux tortoise dot inlays. The black dot is the industry standard and favorite but we encourage folks to buy what they like and to consider any matching trim already seen on the guitar you are buying these for.

These bone and ivory guitar bridge pins are available for both Martin and Gibson guitars as well as many other makes and models. We encourage you to look over our pin chart ( click here ) to select the pin size that is right for your make and model and to see samples of the inlay types. All of our pin sets come with installation instructions.

Please note our bone and the ivory guitar pins are Made in USA by a fastidious American craftsman who enjoys making great pins! On bridge pins, ivory and bone render a near identical sound and either is a significant improvement over plastic or wood. Because of the fact that the materials are acoustically nearly identical and that all our pins are machined to the same high standards we recommend the bone over the ivory as it is basically one third the price. Ivory has a beauty all its own and is ideal for the ultimate in guitar pin beauty for that very special guitar.

To see our selection of bone and ivory guitar end pins ( click here ) .

To see our selection of bone and ivory guitar strap buttons ( click here ) .

Bone or Ivory Guitar Bridge Pins Size 1

Description Part # Purchase
Bone or Ivory Guitar Bridge Pins Size 1.

6 pin set of 3 degree tapered shaft bridge pins with the diameter at the top of the shaft (just below the skirt) of .210 " and a string slot running the full length of the shaft, stopping below the skirt.

See our chart ( click here ) to help you determine the right pin size for your guitar.

Made in USA. Click on Photo for details about international shipping.

Pin-1
More Information
Material Options
Inlay Options

Bone or Ivory Guitar Bridge Pins Size 2A

Description Part # Purchase
Bone or Ivory Guitar bridge Pins Size 2A.

6 pin set of 5 degree tapered shaft bridge pins with the diameter at the top of the shaft of .220 " and a string slot running the full length of the shaft and cutting through the
skirt. Martin guitars (see also size 2C) and Gibson guitars.

See our chart ( click here ) to help you determine the right pin size for your guitar.

Made in USA. Click on photo for details about international shipping.

Pin-2A
More Information
Material Options
Inlay Options

Bone or Ivory Guitar Bridge Pins Size 2C

Description Part # Purchase
Bone or Ivory Guitar bridge Pins Size 2C.

6 pin set of size 2C pins. These are similar to size 2A but with a reduced shaft diameter (.215 " at the top of the shaft) so they will sit flush on the bridge in newer Martin guitars where the bridge pins stick up about 1/4" above the bridge.

See our chart ( click here ) to help you determine the right pin size for your guitar.

Made in USA. Click on photo for details about international shipping.

Pin-2C
More Information
Material Options
Inlay Options